<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 8454] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>2.1986236572265625</x>
    <y>-0.001002192497253418</y>
    <z>8.40411376953125</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>1</x>
    <y>0</y>
    <z>0</z>
  </AxisAsymmetric>
  <MarkerFilename>MarkerAQ.stl</MarkerFilename>
  <ScrewFilename>Hole1.8.sdfa</ScrewFilename>
  <DisplayInformation>NewAncorvis - Innova Bio-Horizons® ø3.0</DisplayInformation>
  <IsWithInterface>true</IsWithInterface>
  <IsWithRotationLock>false</IsWithRotationLock>
  <Keyword>NewAncorvis_Innova_BIO-HIN_30</Keyword>
  <SupportOrientation>-1</SupportOrientation>
  <ReferenceHeightOffset>0</ReferenceHeightOffset>
  <ReferenceRotationOffset>0</ReferenceRotationOffset>
  <RotationLockCount>0</RotationLockCount>
  <Supplier>New Ancorvis Innova</Supplier>
  <SupplierLink>www.newancorvis.eu</SupplierLink>
  <SupplierVersion>2025-1</SupplierVersion>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <PreviewV4IconFilename>preview.png</PreviewV4IconFilename>
  <SupplierV4IconFilename>NA_logo.png</SupplierV4IconFilename>
  <TypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [NA AQ A133]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmNAAQA133</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [NA AQ A133]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmNAAQA133</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5671958923339844</x>
        <y>-0.011724233627319336</y>
        <z>8.5984067916870117</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>MarkerAQsmall_2.1.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [NA AQsmall A633]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmNAAQsmallA633</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5671958923339844</x>
        <y>-0.011724233627319336</y>
        <z>8.5984067916870117</z>
      </RegistrationClickCenter>
      <MarkerFilename>MarkerAQsmall_2.1.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [NA AQsmall A633]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmNAAQsmallA633</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5494003295898438</x>
        <y>-0.037874698638916016</y>
        <z>7.6160311698913574</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>STL-TP3TSB-EX-SCAN Rev A.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [Bio-Horizons® Titanium TP3TSB]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmBioHorizonsTitaniumTP3TSB</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5494003295898438</x>
        <y>0.0017056465148925781</y>
        <z>8.2689142227172852</z>
      </RegistrationClickCenter>
      <MarkerFilename>STL-TP3TSB-EX-SCAN Rev A.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [Bio-Horizons® Titanium TP3TSB]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmBioHorizonsTitaniumTP3TSB</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0.30480194091796875</x>
        <y>-0.051351547241210938</y>
        <z>13.618099212646484</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>exocad BioH 3.0 SNAP SCAN BODY (REV A).stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [Bio-Horizons® SNAP TP3SSB]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmBioHorizonsSNAPTP3SSB</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>0.30480194091796875</x>
        <y>-0.088907241821289063</y>
        <z>13.579237937927246</z>
      </RegistrationClickCenter>
      <MarkerFilename>exocad BioH 3.0 SNAP SCAN BODY (REV A).stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [Bio-Horizons® SNAP TP3SSB]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmBioHorizonsSNAPTP3SSB</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5443191528320313</x>
        <y>-0.056790590286254883</y>
        <z>7.260859489440918</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>STL-TP3SSB8-EX-SCAN Rev A.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [Bio-Horizons® SNAP 8mm TP3SSB8]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmBioHorizonsSNAP8mmTP3SSB8</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.5443191528320313</x>
        <y>-0.030645608901977539</y>
        <z>7.3131489753723145</z>
      </RegistrationClickCenter>
      <MarkerFilename>STL-TP3SSB8-EX-SCAN Rev A.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [Bio-Horizons® SNAP 8mm TP3SSB8]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmBioHorizonsSNAP8mmTP3SSB8</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.8033981323242188</x>
        <y>-0.0045006275177001953</y>
        <z>10.280583381652832</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>STL-TP3SSB11-EX-SCAN Rev A.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [Bio-Horizons® SNAP 11mm TP3SSB11]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmBioHorizonsSNAP11mmTP3SSB11</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.8033981323242188</x>
        <y>-0.12215256690979004</y>
        <z>10.280583381652832</z>
      </RegistrationClickCenter>
      <MarkerFilename>STL-TP3SSB11-EX-SCAN Rev A.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [Bio-Horizons® SNAP 11mm TP3SSB11]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmBioHorizonsSNAP11mmTP3SSB11</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.397003173828125</x>
        <y>0.060861110687255859</y>
        <z>6.1497054100036621</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>exocad BioH 3.0 SCAN ABUTMENT (REV A).stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [Bio-Horizons® PEEK TP3PSA]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmBioHorizonsPEEKTP3PSA</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.397003173828125</x>
        <y>-0.030645608901977539</y>
        <z>6.2281398773193359</z>
      </RegistrationClickCenter>
      <MarkerFilename>exocad BioH 3.0 SCAN ABUTMENT (REV A).stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [Bio-Horizons® PEEK TP3PSA]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmBioHorizonsPEEKTP3PSA</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.32159423828125</x>
        <y>-0.017429351806640625</y>
        <z>9.4784221649169922</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>c29428.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [ELOS® IO 11A-A]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmELOSIO11AA</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.2875213623046875</x>
        <y>0.0397493839263916</y>
        <z>9.5070114135742188</z>
      </RegistrationClickCenter>
      <MarkerFilename>c29428.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [ELOS® IO 11A-A]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmELOSIO11AA</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.75</x>
        <y>-0.000800013542175293</y>
        <z>7.400423526763916</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>A-BIO-HOR-INT-3.0.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH07.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=0.7mm [Arum® B140]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG07mmArumB140</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-93.stl</SupportFilename>
          <DisplayInformation>hC=9.3mm V4BH30RH07</DisplayInformation>
          <Keyword>hC93mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-80.stl</SupportFilename>
          <DisplayInformation>hC=8.0mm V4BH30RH07</DisplayInformation>
          <Keyword>hC80mmV4BH30RH07</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-07-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH07(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH07I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.75</x>
        <y>0.011122345924377441</y>
        <z>7.3894810676574707</z>
      </RegistrationClickCenter>
      <MarkerFilename>A-BIO-HOR-INT-3.0.stl</MarkerFilename>
      <InterfaceFilename>V4-BH30RH15.sdfa</InterfaceFilename>
      <ImplantFilename>H-330863_an.sdfa</ImplantFilename>
      <DisplayInformation>hG=1.5mm [Arum® B140]</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>hG15mmArumB140</Keyword>
      <ImplantConnection>
        <ID>BioH_MFTI_P30</ID>
        <ID>BioH_T42_P30</ID>
        <ID>BioH_TP_P30</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-85.stl</SupportFilename>
          <DisplayInformation>hC=8.5mm V4BH30RH15</DisplayInformation>
          <Keyword>hC85mmV4BH30RH15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-70.stl</SupportFilename>
          <DisplayInformation>hC=7.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC70mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-60.stl</SupportFilename>
          <DisplayInformation>hC=6.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC60mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-50.stl</SupportFilename>
          <DisplayInformation>hC=5.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC50mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-40.stl</SupportFilename>
          <DisplayInformation>hC=4.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC40mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>Inn-A-15-30.stl</SupportFilename>
          <DisplayInformation>hC=3.0mm V4BH30RH15(I)</DisplayInformation>
          <Keyword>hC30mmV4BH30RH15I</Keyword>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">20</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <SignatureDate>2024-09-25T09:50:14.4743043Z</SignatureDate>
  <InfoSignature>Not yet signed</InfoSignature>
  <InfoSignatureV4> </InfoSignatureV4>
  <InfoSignatureV5> </InfoSignatureV5>
  <InfoSignatureV6> </InfoSignatureV6>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>MarkerAQ.stl</Filename>
      <Signature>JkrxN9TT+VBtGnUsbnIwhMF7CxKsCQS6B2iLecWH6C8mQ2EQufK0VLXBSvnUAfwprOTTr3W+oE/RJYYWVARyFw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Hole1.8.sdfa</Filename>
      <Signature>KDrEZ8k3Hgi3x12dhtF6HtLgAIkiiTjfAeDgRYKoUcCMl0pigg8s27HZvSpWAa/YU1oqSxcteIk/VyBtwNpTRA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>preview.png</Filename>
      <Signature>geH5x78sMJSrUDDczACtwgogBqjNJfPOKLj4aU4L4C+YC69HrtZl3v3TLoqAVietaORe/mmpK+M465VxeydnCg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>NA_logo.png</Filename>
      <Signature>9oGTKHibcl/u4R+rt7njlYHxybzojjXtf6BklksRHAFf9cV9kl9hK305n/7CCyz5T+KbJ40/x3zbQuzmPUVS6g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>V4-BH30RH07.sdfa</Filename>
      <Signature>seInPv1QHKZ6XzjFt8W+HNKZgrsdd7Ui2YMciaQdHa0L+yY1RvwOMqHSCQzK1wCAdQAIxf256OYbWNOo0tBGtw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>H-330863_an.sdfa</Filename>
      <Signature>ToaE4/T4WkcaOz8skhuyi8eOlwblI0g1fbatSbWA3fDWieNYIE9JkqyzODJVrn79IThJaFScVOSabn/vDRHiTQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-07-93.stl</Filename>
      <Signature>ekE08vh1n+7D+QiV1puW/v+WVWjMU/nCWU2SjFF3vM9e1ZKlh1zO08cUyI0Xjga5deS/azIb6Qu+n4Z020roLA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-07-80.stl</Filename>
      <Signature>q2y0Vnf8DgVJn14O4OJ2eXwByi7PLCDjD9xDh4sZeA/ebmtGXYQ2chqxiKfJW04q4Pfj3EqDTNgD2Fce1viB8Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-07-70.stl</Filename>
      <Signature>5rLedIYc9N/y9xxasgTFhKj/N+Ha8GU0KmQ6Uc3W3ZuSu0kkq3B8ZqC9esht5fNaA/eq4tNlcolJarlora+Kpw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-07-60.stl</Filename>
      <Signature>woDGXgHldj0M6kJY+83dM/J2FfHpaDwylkaomZz9RH2IFeeQp0TIdwjvWYkGO/2yJLF9bE8NrtXK9qGfA97tqQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-07-50.stl</Filename>
      <Signature>B84iAhOhitgZlh1KXqTJYAyU++vmR2SwVEmPSH+IO8CAFJ38ZH2L96EjMht6nnpEkhT9X6hQHdmPaB1zkyF1oA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-07-40.stl</Filename>
      <Signature>JQIpmoDAYTEu/p0T0ILqpghFzIV7OEPAvlSKmLnhMA4HhpfYGzk/cb1w7+dJtCtMv1d9P1ZKGSxCRmfP0FLiEw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-07-30.stl</Filename>
      <Signature>IRlBYVAZEezKEXvQjh428izh88K3NgzAMo7Ne7oj5h7xwVLKkeLuBQauYtARcGhrtyneONNLqG3mSCTzJGX/XQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>V4-BH30RH15.sdfa</Filename>
      <Signature>myskUSgpaMKwnpORxIJGR2/jWP7fkeAI1A78iuHwXCLsLAbCfJmBhEizA+XKdIFAqIO5IaBwG2BGIpOjYep++g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-15-85.stl</Filename>
      <Signature>tnNCJ/E3nfwTCKCk3yz0EeiEiGNCBOqqfFsaPosBI04qyiqJ4awvXLp2lfWiXf3riHPbFxC95YWoQ9TQ8STenw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-15-70.stl</Filename>
      <Signature>3NMa2u4RbX7WIWKYWW0hKkBJRAlAQA4l/iizXRs2OITI25gNJYMBTDjhxg68P+l9Ecm6cP44oiTImhHxWgVI7w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-15-60.stl</Filename>
      <Signature>nDPbcnPIo90jKmbv0qJDziCskbT5mlWdeSLN7ntjHU+14/QLM16uX0aFZYM9tLDbjLQFzOAJ13j0EuQurMpkVA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-15-50.stl</Filename>
      <Signature>BmVoWYRG/aE8AgX53yYZpVyY71iyrN4X/X+Jq/QDGEv2lxqwHdHOjATuM0h1nPij1ZyPtE7dM9AL8kHY4yWeWA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-15-40.stl</Filename>
      <Signature>z8sO+MA/rCO+o9O40P/Xb323t+hu7ILs1qfQh50f+26u7OR90rY4GueN7AhrqFnAAZvXcsonPnx+SObu1V32FQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-A-15-30.stl</Filename>
      <Signature>U0ILZCq/XWnTTgCZcUVYVmm1b671+jBmRWJeIdpdEnoe60LCg3uPLA2Zo+JO+OFkThhYylVA2vBaZqZBgPzriQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>V4-BH35RH07.sdfa</Filename>
      <Signature>eOEAS0NdduGVK/DDyfWr9diNLbMdJ3D05snWgM1zoka/7+UsV+dT0tcM7BJeIwRzI4/scAbg3qCyDETAmgRSWA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>L-380863_an.sdfa</Filename>
      <Signature>Di1Bc9wbptse1A7wAnMH0lIvw50Z2pkIchKePjjSkzqIqZ41l/wAIfRzcgtPLh/KHUiEQz+8yyoUiW3Iuq5U4A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>V4-BH35RH15.sdfa</Filename>
      <Signature>GSy1LlYzmXXy5zzgj+IK0O4kRoe8dwVUbOHEpX2QkTNTql1ZV7vWrJVkhrRI5/Vix9MjYvgOoDBbESmRecmaBw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>V4-BH45RH07.sdfa</Filename>
      <Signature>6z8ikbDY0DG+TlZBLKepGAm5mehyWnUicNSCTAjkx7gf79PTDiB6aKBq6xRL+SbHt2cIXkVjwFkQPrlxFA4lEg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>O-480863_an.sdfa</Filename>
      <Signature>Pe2Ma7jOUJKfk0xD17qhbM8EO+9wDsiNr6HkxxWsLvwXsE2gTf1WVjoF4YYGNhrgSNOCt8q477vT3Vgvww0Gbg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-07-93.stl</Filename>
      <Signature>/1uHose2FtYNpNmNbVFVwjHhRsyx52M1AV6OaFN1id0DbRWaximLWAmbn1aQIi0oQRc3uBGcMHza8e/sMWQFmQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-07-80.stl</Filename>
      <Signature>dMjJ1v6VFZjEMYnEwkPmfYdwLEbmKg3N398xtjyg4AuF15fBPLZkFzHvXDtuNcFMLN6faJspswXB/v3+sI2Mxw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-07-70.stl</Filename>
      <Signature>ZiMA2JlM4f2f1bksmKJOsfZwy7o/qhVQU0xwUwTYzNF/xH4y5h/sxq6QsQXxEbOk6h2dGomHTNft52azVCNYyg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-07-60.stl</Filename>
      <Signature>chIjoJjknDOxN/E4eLWBAz7k/aosyIZLUwmt2DHIXRn0ttgFrceZ7MnQtGXZ/grLI4ZVPp5EpATCxfMZ/uTm1g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-07-50.stl</Filename>
      <Signature>euS4l8A2VL9w88ZgwqcOktioW0Tvoqe1Oima70m9ZyUScIL9f4ek29G49ZBMUwrRakFc+jpr6bxM/lAqaeNYog==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-07-40.stl</Filename>
      <Signature>/k8l4QJ76cSzajrthXnG0spPR+OCbm/M969vLdgp14lWGHr89542WkMikvCUDvV8M9k7Or1rEbmc7XrcshxYEw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-07-30.stl</Filename>
      <Signature>xIbqHBKTDXLG9iB4eooU3A5bSLhr7nqtTcnn5mC4oszgGUaG9SgdIyeJGR3tHm6zjE29pJ8vLQL0bcCq7Y6lDA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>V4-BH45RH15.sdfa</Filename>
      <Signature>Rd5pVp7z5sbgVi/VxXQVa0zeZWl74zGUbvneLypd7D5Z4i0BE4BBs0SPTJRxdUdLY3JfY+/N3uaA5Cr+ue8eDw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-15-85.stl</Filename>
      <Signature>RxydoVGz1OWVdYXSVWqLLmSOxVWkyIqzHWhin0Ouf36WE5R08u/tYAq4TQLZOACv+i+ycOzrF9ST1iyWLaaTPg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-15-70.stl</Filename>
      <Signature>tZycLzgSXqF7IeSNWtVXWToAlxiORqhLASMQ5qoRiBXaWLo3205XLD2f2LvBhagtkUGG1JgkRfR7FRVlBZvUqQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-15-60.stl</Filename>
      <Signature>6oPudeNeCCjqFbJ++ToDJ1xX0rqIR05lWyYQaNEwni/zLMsAvlHSE+A7t6bFs11AUkImtuzblX9FDBMelQ2nXQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-15-50.stl</Filename>
      <Signature>aIzUmqzKpxCDNvJ3ZuL1ZHlxbeM+7soe/huevjRLTJznro1nCYGJk5fchx8bgbp8SwntxTngocie2CqWKiLYuA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-15-40.stl</Filename>
      <Signature>wrUDtPso8y9zaFa23pbb1p3zsQgBWQprwAOdLUAKFfQeIdOgWbu0vhZ+3cxwBD8sHlf+DdTatQBhqXQpTAq8SA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Inn-B-15-30.stl</Filename>
      <Signature>BK2htd0VzS86uN4OqDH0eziDsZFmBrWo84zz1PB0tQ+WOTOTXRi86iHE9UOiIAIvXcsJYQgBgHl581gI/sZ6Hg==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>